Featuring a nylock nut that won't come off or loosen
Used mainly on the rear wheel of a manual wheelchair
2 lengths to choose from
Sold individually (each)
1/2" Fine Thread Wheelchair Axle with Nut Fitment Notes
These axles are used on a variety of manual wheelchairs to secure the rear wheel to the wheelchair. To get the proper length, measure from the underside of the axle head (on your existing axle) to the end. If the existing axle is not available, you will need to add the the hub width of the wheel, the carrier tube on the wheelchair, plus any spacer that may be used and add approximately 1/2" of an inch (to allow for the nut). Also make sure the inner diameter of your wheel bearing is 1/2".