|Standard two piece caster wheel design with smooth riding multi ribbed tire. Multi ribbed tread comes in a choice of pneumatic with tube, flat free urethane, or flat free foam filled.
Many Invacare power wheelchairs today use a 7/16" inner diameter bearing and most other brands use a 5/16" inner diameter bearing. Since wheelchair manufacturers change parts suppliers on a regular basis, it is highly advisable to check your exisitng bearings by measuring the inner diameter of the bearing.
This two piece wheelchair caster wheel with 5/16" inner diameter bearings can also be used as a replacement for the Pride Mobility 8 x 2 wheelchair caster part number WHLASMB1112
(which is a one piece design). A two piece design allows you to change the tire later on instead of the whole assembly.
Measuring your existing wheelchair caster:
Purchasing the proper wheelchair caster is as simple as measuring the old one. Even if the size is written on the existing caster, you still want to make sure the hub width and bearing size will be correct. Properly measuring will ensure you order the correct caster and prevent an installation headache and the hassle of sending them back.
If you have questions about which wheelchair caster to purchase, how to determine the correct size, or an installation question, visit our main wheelchair caster page here
8 x 2 in. Standard Wheelchair Caster Wheel with Choice of Tire
CW191, CW192, CW193, CW201, CW202, CW203