80 mm Volcanic Glare Ultimate™ Light-Up Wheelchair Caster
Features 4 bright LED lights per side in green, red, blue, and white (8 lights per wheel)
Lights can be seen at 360 degree angles
Solid flat free tire made from clear urethane
Water resistant design helps keep lighting elements dry*
Lights are powered by a self generating system - no batteries required
1" hub width (use the guide below for help measuring your existing caster wheel)
5/16" inner diameter high performance bearings included (608Z)
CLEARANCE ITEM - NOTE QUANTITY I N STOCK PRIOR TO ORDERING
Sold individually (each). For a pair, order quantity 2
*Water resistant does not mean water proof - Care should be taken when used in a wet environment.
How Does it Work?
As the wheelchair caster rolls forward or backward, a self generating power system (magnet ring) supplies a small electric charge to power each LED light. The faster the wheelchair caster rolls, the more the LED's light up. Even though there are only 4 small LED lights per side, once rolling they give the impression the entire wheel is covered in lights! In fact the LED light is bright enough to be seen up to 300 meters away making these caster wheels an excellent safety device while using your wheelchair at night.
This lighted wheelchair caster assembly can be used on many wheelchair models from Quickie, TiLite (with 608 bearings), Top End (Invacare), Colours, and many other wheelchair brands. The actual standard size of this caster is a little over 3 5/32". We also carry the 3" model (76 mm), which can be found on this page.
Volcanic Glare Ultimate™ Light-Up Wheelchair Caster Video
Measuring your existing wheelchair caster:
Purchasing the proper wheelchair caster is as simple as measuring the old one. Even if the size is written on the existing caster, you still want to make sure the hub width and bearing size will be correct. Properly measuring will ensure you order the correct caster and prevent an installation headache and the hassle of sending them back.