Designed for doorways and raised landings, the EZ-ACCESS Rubber Threshold ramp can be used by itself or in a pair to make entry and/or exit convenient and safe. The ramp simply sits against the doorsill (inside or outside) to provide a smooth ground to sill transition and is especially practical for sliding glass doors because it does not interfere with the door track. Made of 100% recycled tires, slip-resistant and designed for years of continued use. Its 2½-inch height can easily be trimmed for lower heights and narrower widths to fit any entrance or threshold. The ramp is fully portable and the standard width is 48-inches (for wider entrances, simply place two ramps side-by side). Optional components are available to reach heights greater than 2½ inches.

 

If the standard 2 1/2" rise is not enough, you can combine a set of EZ Access® Rubber Wheelchair or Scooter Threshold Ramps and a set of risers to raise it up to a maximum of 4 3/4" rise. The risers are also trimmable to fit a variety of heights and widths for a custom fit. You can choose to add the risers when ordering above (adding the risers also adds the second threshold ramp).

2 EZ Access® Rubber Wheelchair or Scooter Threshold Ramps shown witth optional risers

 

Specifications	THR-250	THR-RISER-225 (1 pr)
Made of 100% recycled rubber
Non-skid surface
Usable size (H x L x W)	2 1/2"x24"x48"	2 1/4"x24"x24" (two each)
Overall size (H x L x W)	2 1/2"x24"x48"	2 1/4"x24"x24" (two each)
Weight (lbs.)*	40	23 1/2 per riser (2 each)
Weight capacity (lbs.)	850	850
For wheelchairs & scooters
Usage guidlines**	2 1/2" rise	4 3/4" rise (combined with THR-250)

 

*Weights are approximate and may vary

**Consult your equipment's owner guide for proper degree of incline. Never exeed its recommendations. If you need help in determining proper incline, view our incline chart here (Adobe PDF required).