Hello. New customer? Start here.   
Shop By Category

Buyers Guides
  Buying Guide - Bearings
  Buying Guide - Caster Wheels
  Buying Wheelchair / Scooter Tires
  Wheelchair Upholstery Guide
  Buying Guide - Wheelchairs
  Buying Guide - Walking Canes
  Buying Guide - Walkers & Rollators
  Articles & Blogs
  Installing Wheelchair / Scooter Tires
  Buying a Wheelchair Chest Harness
  Wheelchair Ramp Buying Guide

 
 
 
Frog Legs
Frog Legs Ultra-Sport Shock Absorbing Caster Forks for Manual Wheelchair – Angled view shown
View Larger
Frog Legs Ultra-Sport Shock Absorbing Caster Forks for Manual Wheelchair – Angled view shown Frog Legs Ultra-Sport Shock Absorbing Caster Forks for Manual Wheelchair – Side view shown Frog Legs Ultra-Sport Shock Absorbing Caster Forks for Manual Wheelchair – Exploded parts view shown  
 
Frog Legs Ultra-Sport Shock Absorbing Caster Forks for Manual Wheelchair – pr
 
0.0
Be the first to Write a Review
 
 
Item#:  CF110
Retail Price  US $319.99
Our Price:  US $299.99
You Save:  US $20.00 (6%)
Qty: 
 
The Frog Legs Ultra-Sport Shock Absorbing Caster Fork features a unique design that eliminates 76% of all shock and provides the casters the ability to lift back, up and over obstacles to minimize pitching

Frog Legs Ultra-Sport Shock Absorbing Caster Forks for Manual Wheelchair – pr

  • Designed to eliminate much of the road shock encountered by the caster fork for a smoother ride
  • Helps prevent back pain and muscle spasms
  • Made from lightweight anodized aluminum
  • Works with 3", 4", 5", and 6" caster wheels with 5/16 caster bearings only (1 1/2" maximum width)
  • If properly ordered, the ride height of your wheelchair will not change
  • Custom order item with extended lead time
  • Latex free
  • Sold as a pair
How to Order the Ultra-Sport Shock Absorbing Caster Forks
The following information is required to order:
  • Make and model of your manual wheelchair
  • Users weight (these caster forks are rated for 120 to 280 lbs)
  • Caster barrel to floor height in inches (see how to measure below - minimum height required is 4.5")
  • Caster wheel diameter that will be used (these forks accept 3", 4", 5", and 6" casters only)
You can include the above information in the note section of your order (in the shopping cart) or you can email us the information and reference your order number to support@EnableYourLife.com. Since these are made to order, the lead time is approx 7-10 days. Please note these forks are non-returnable.



Frog Legs Ultra-Sport Shock Absorbing Caster Forks for Manual Wheelchair Specifications
Weight is 11.5 oz per fork (with hardware)
1/2" diameter and 2 1/2" length stem bolt (standard length)
Made from anodized aluminum
Polymer suspension bushing based on users weight
Overall width is 2"
Overall height excluding stem bolt is 5 1/4"
Accommodates 3", 4", 5", and 6" caster wheels up to 1 1/2" wide with 5/16" bearings
Designed for users between 120 and 280 lbs
Hardware included: 2 5/16" axle pins, 2 nylock nuts, 4 washers, 4 5/16" spacers

Installation of Frog Legs Ultra-Sport Shock Absorbing Caster Forks
Step 1. Use a small screwdriver to remove the plastic cover or dust cap from the top of the caster barrel housing. Find the seam between the cap and caster barrel, and pry up with the screw driver.

Step 2. Use a ¾ inch (19mm) socket and ratchet to remove the “nylock” nut located below the dust cap removed in Step 1. The rigid fork assembly will have to be held in place to remove the nut. Usually this can be held by hand, but bracing the assembly against a hard surface will also work. One the nut is removed, the rigid fork assembly can be removed from the caster barrel housing. Note: A bag of hardware containing new nylock nuts, washers, etc. are supplied with your Frog Legs forks.

Step 3. If your existing caster wheel is 6 inches in diameter or less and you would like to use this wheel for your new suspension system, then this wheel has to be removed from the old rigid fork. Depending on the type of rigid system you currently have, you may have to find some additional tools to remove the caster wheel. Once the wheel is removed, it can be installed on your new Frog Legs Shock Absorbers.
Supplied with your new set are (2) axle pins, (2) button-head screws and (4) wheel spacers you will need to attach your new caster wheels to your new forks. First choose one of the three axle location holes in your new forks, and then put the axle bolt partially through the hole. Add one of the provided spacers, or use your rigid system spacer if you have them. Next, insert the wheel, push the axle through the wheel and then add another spacer. Push the axle bolt through the other side of the fork. Install the “button-head screw” that came with the axle pin and tighten the assembly.

Step 4. Install the suspension fork assembly on the chair by inserting the stem of the suspension assembly into caster barrel housing on your chair. See above diagram. Install the new “nylock” nut on the stem bolt with the ¾ inch (19mm) socket and ratchet. Tighten this nut until all vertical stem play is removed. Over tightening will result in a fork assembly that will not swivel freely. If this occurs, simply loosen the stem “nylock” nut until fork assembly rotates freely.
Step 5. Snap the dust cover back in place on top of the caster barrel housing. This completes the installation.

Frog Legs Ultra-Sport Shock Absorbing Caster Forks for Manual Wheelchair – pr
CF110

Average Rating: 
0.0


5 in. Aluminum Wheelchair Caster Fork With 2 1/2L x 1/2 in. Stem & Nut
US $39.99 (Retail Price US $47.99)
  View this product
6 in. Aluminum Wheelchair Caster Fork With 2 1/2L x 1/2 in. Stem & Nut
US $46.69 (Retail Price US $55.99)
  View this product
7 in. Aluminum Wheelchair Caster Fork - Invacare Type - pr
US $36.99 (Retail Price US $49.99)
  View this product
7 in. Aluminum Wheelchair Caster Fork With 2 1/2L x 1/2 in. Stem & Nut
US $36.99 (Retail Price US $43.99)
  View this product
7 in. Aluminum Wheelchair Fork With 67MM x 12MM Stem & Nut
US $36.99 (Retail Price US $43.99)
  View this product
3 x 1 in. EPIC Aluminum Narrow Court Wheelchair Caster Wheel - Angled view of black and silver hubs
US $85.69 (Retail Price US $99.99)
  View this product
4 x 1 in. EPIC Aluminum Narrow Court Wheelchair Caster Wheel - Showing angled view of black and silver hubs
US $74.29 (Retail Price US $85.99)
  View this product
5 x 1 in. EPIC Aluminum Narrow Court Wheelchair Caster Wheel - Angled view of silver and black hubs
US $77.29 (Retail Price US $88.99)
  View this product
6 x 1 in. EPIC Aluminum Narrow Court Wheelchair Caster Wheel - Angled view of both black and silver hubs shown
US $94.29 (Retail Price US $107.99)
  View this product

 
 
 

Customer Support
Shopping Tools
Information
We Accept
Shop Confidently
Secure Shopping by Geotrust

Submit email address for exclusive offers
©2009-2018 Enable Your Life, Inc. | EnableYourLife.com
All trademarks, logos, and images are owned by their respective owners