(800) 983-3602
Monday - Friday 9am - 4pm Pacific
support@enableyourlife.com
Categories
Clearance Center!
Aids for Daily Living
Bathroom Safety
Medication Aids
Respiratory Therapy
Self Help Aids
Walking Aids
Wheelchairs & Scooters
Wheelchair and Scooter Parts
 
 
1/2 in. x 32 mm 6201RS1/2 Precision Wheelchair or Scooter Bearing - Front view shown
View Larger
1/2 in. x 32 mm 6201RS1/2 Precision Wheelchair or Scooter Bearing - Front view shown 1/2 in. x 32 mm 6201RS1/2 Precision Wheelchair or Scooter Bearing - Angled view shown view shown  
0 Star Rating
0.0
 (Be the first to Write a Review)
 
 

1/2 in. x 32 mm 6201RS1/2 Precision Wheelchair or Scooter Bearing

Item #: B86  
The 1/2 in. x 32 mm 6201RS1/2 Precision Wheelchair or Scooter Bearing features a maintenance free design and is used to adapt several manual wheelchair wheels using 32 mm outer diameter bearings to wheelchairs using 1/2" axles.
 
Regular Price$3.99
Price:
$2.99
You Save:$1.00 (25%)
Qty: 
 

1/2 in. x 32 mm 6201RS1/2 Precision Wheelchair or Scooter Bearing

  • Maintenance free design and pre-greased
  • High quality double shielded design keeps grease in and contaminants out
  • Replacement for bearing reference numbers 6201RS1/2
  • Inside diameter (bore) 1/2 in. (12.7 mm)
  • Outside diameter 32 mm (1.12598 in.)
  • Width (thickness) 10 mm (.3937 in.)
  • Sold individually (each)
1/2 in. x 32 mm 6201RS1/2 Precision Wheelchair or Scooter Bearing Fitment Notes
This bearing is used on some rear wheelchair wheels that use a 1/2" wheelchair axle but with an outer diameter of 32 mm. This set-up is not very common so if there is no reference number, you'll want to measure. Keep in mind there are several bearings with reference numbers starting with 6201 so measuring is a good idea.

General Wheelchair and Scooter Bearing Notes
Many bearings found on wheelchairs and scooters have a alpha numeric reference or just a numeric reference number stamped on the side of the bearing which refers to the type and size of the bearing. In most cases, that is all you need to purchase the correct bearing. For alpha numeric reference numbers ending in Z, ZZ, RS, or 2RS, they are all interchangeable (Z and ZZ refer to a metal outer side shield and RS and 2RS refer to a rubber outer side shield protecting the balls inside the bearing). If your bearing has no reference on it, you will have to measure. If the bearing reference appears worn off, you may be able to see it stamped on the other side.
1/2 in. x 32 mm 6201RS1/2 Precision Wheelchair or Scooter Bearing
B86, EYLB86
 Average Rating:  0 Star Rating
0.0
 
Write a Review

Related Products

 
WARNING: Many of the products carried by EnableYourLife.com can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.