10 x 3 in. (3.00-4) Primo Powertrax Heavy Duty Foam Filled Tire
The 10 x 3 in. (3.00-4) Primo Powertrax Heavy Duty Foam Filled Wheelchair and Scooter Tire features a knobby design tread that provides ultimate traction on a variety of surfaces and the foam filling on this model gives a very firm ride. Sold individually (each). For a pair, order quantity 2.
10 x 3 in. (3.00-4) Primo Powertrax Heavy Duty Foam Filled Wheelchair and Scooter Tire
Replacement for sizes 10 x 3 in, 3.00-4, and 260 x 85
C248 tread pattern (knobby design)
Bead width is 2.75” (Use the guide below for help finding your proper bead width)
Two piece wheels (split rims) are required
Sold individually (each). For a pair, order quantity 2
Important Branding Note
These tires may be branded either Primo Powertrax or Cheng Shin. They are the exactly the same tire from the same manufacturer.
This model tire (F059C) is the same as model F059, but filled with denser foam to give a much firmer ride.
10 x 3 in. (3.00-4) Primo Powertrax Foam Filled Wheelchair and Scooter Tire Fitment Notes:
The 2.75" bead width model is known to fit the following power wheelchairs from Quickie: Aspire Mini, Freestyle Mini, P200, P210, P300, and the P320. They fit other power wheelchairs and power scooters from Invacare, Pride, Hoverround etc. Measuring your bead width is always recommended for confirmation.
A Few Words About Foam Filled Wheelchair and Scooter Tire Bead Width
Foam filled wheelchair tires and foam filled scooter tires provide added peace of mind knowing you won't ever get a flat tire and you won't ever have to fill the tire with air. This added peace of mind requires your wheelchair or scooter to have a two piece wheel (also called a split rim) to be able to install them. Since a foam filled tire is basically a pneumatic tire filled with foam during the manufacturing process, tire sizing is the same. However the bead width of the split rim can vary. This is because there was never standard (split rim) bead width sizing adopted in the wheelchair/scooter industry. As a result you can have several tires of the same size with different bead widths and only one of them will properly fit your split rim. If the bead width of the tire you purchase is too narrow for your split rim, there will not be enough compression between the two halves of your split rim against the tire causing the tire to rotate separately. If the bead width is too wide, you will never get the two halves of the split rim and the tire screwed back together. Taking the time to measure bead width will ensure you purchase the right foam filled tire and save you from an installation headache and the hassle of sending them back.