• Replacement for sizes 10 x 3 in, 3.00-4, and 260 x 85
• Tread pattern: C-9210 Durotrap tire
• 4 ply construction for maximum durability
  
• This is an air filled tire with max PSI of 35
• Choose to add inner tube with schrader valve (SV) when ordering and save!
• Gray in color
• Latex free
  
• Sold individually (each). For a pair, please order a quantity of 2.

Fitment Notes
Known to fit many power wheelchairs and scooters from Invacare, Pride Mobility (Jazzy, Jet, Quantum, Celebrity, Legend, Shuttle, Victory), Bruno, Merits, Shoprider, and some Rascal models. To confirm the size, look on the existing tire you wish to replace and note the size numbers printed on the sidewall. It will be expressed either as 10 x 3", 3.00-4, 260 x 85, or any combination of these three. Also verify that your tire is pneumatic by looking for the valve stem. If you are changing from a foam filled or solid urethane to a pneumatic tire, make sure your existing rim has a hole for the valve stem to come out. If you need the foam filled version of this tire, it can be found on this page.

10 x 3 in. (3.00-4) Primo Durotrap Wheelchair / Scooter Tire Purchase Notes
This is a pneumatic tire and requires an inner tube. Choose to add an inner tube with a schrader valve bent at 90 degrees when ordering (a schrader valve is the standard bicycle / car tire type valve). It is best practice to replace the inner tube when replacing a tire since inner tubes can exhibit wear and fatigue especially at the seams with prolonged use.