As the current pandemic of Covid-19 continues to grow, we share your concern for protecting your families while controlling the spread of this disease. We are open for business on a modified schedule and shipping as normally as circumstances will allow (as are many of our suppliers). Our phones will continue to remain open during business hours to answer any questions you may have, but please know we may not be able to answer every call and if that is the case, please leave us a message and we will return your call as soon as possible. Thank you for your understanding in these challenging times and please stay safe.
10 x 3 in. (3.00-4) Primo Durotrap Foam Filled Wheelchair/Scooter Tire
Item #:
F056
The 10 x 3 in. (3.00-4) Primo Durotrap Foam Filled Wheelchair/Scooter Tire is the original OEM tire found on many wheelchairs and scooters from Pride, Invacare, Rascal, Shoprider, plus many others. Sold individually (each). For a pair, order quantity 2.
10 x 3 in. (3.00-4) (300-4) Primo Durotrap Foam Filled Wheelchair/Scooter Tire
Replacement for sizes 10 x 3 in, 3.00-4, and 260 x 85
C9210 tread pattern (durotrap design)
Bead width is 2 5/8 or 2.3/4" - choose when ordering (Use the guide below for help finding your proper bead width)
Two piece wheels (split rims) are required
Latex free
Sold individually (each). For a pair, order quantity 2
Durotrap tread pattern provides a comfortable ride along with traction in slippery conditions and foam fill gives the user peace of mind he/she will never get a flat or have to fill the tire with air.
Pride Mobility Power Wheelchairs and Scooters (Quantum, Jazzy, Jet, Edge)
(Chart below is provided as a courtesy only to help you select the correct Primo Durotrap foam filled tire and is subject to change at any time. Read the chart carefully as some wheelchair models are listed several times with different configurations. Your wheelchair must have the split rim option (two piece) and it is always advisable to double check your existing tire or rim bead width for confirmation).
(Chart below is provided as a courtesy only to help you select the correct Primo Durotrap foam filled tire and is subject to change at any time. Read the chart carefully as some wheelchair models are listed several times with different configurations. Your wheelchair must have the split rim option (two piece) and it is always advisable to double check your existing tire or rim bead width for confirmation).
A Few Words About Foam Filled Wheelchair and Scooter Tire Bead Width
Foam filled wheelchair tires and foam filled scooter tires provide added peace of mind knowing you won't ever get a flat tire and you won't ever have to fill the tire with air. This added peace of mind requires your wheelchair or scooter to have a two piece wheel (also called a split rim) to be able to install them. Since a foam filled tire is basically a pneumatic tire filled with foam during the manufacturing process, tire sizing is the same. However the bead width of the split rim can vary. This is because there was never standard (split rim) bead width sizing adopted in the wheelchair/scooter industry. As a result you can have several tires of the same size with different bead widths and only one of them will properly fit your split rim. If the bead width of the tire you purchase is too narrow for your split rim, there will not be enough compression between the two halves of your split rim against the tire causing the tire to rotate separately. If the bead width is too wide, you will never get the two halves of the split rim and the tire screwed back together. Taking the time to measure bead width will ensure you purchase the right foam filled tire and save you from an installation headache and the hassle of sending them back.
WARNING: Many of the products carried by EnableYourLife.com can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
