(800) 983-3602
Monday - Friday 9am - 4pm Pacific
support@enableyourlife.com
Categories
Clearance Center!
Aids for Daily Living
Bathroom Safety
Diagnostic Equipment
Exercise
Medication Aids
Patient Care
Respiratory Therapy
Self Help Aids
Walking Aids
Wheelchairs & Scooters
Wheelchair and Scooter Parts
 
 
12 mm x 1 1/8 in. R8RS12mm Precision Wheelchair or Scooter Bearing - Front view shown
View Larger
12 mm x 1 1/8 in. R8RS12mm Precision Wheelchair or Scooter Bearing - Front view shown 12 mm x 1 1/8 in. R8RS12mm Precision Wheelchair or Scooter Bearing - Angled view shown  
0 Star Rating
0.0
 (Be the first to Write a Review)
 
 

12 mm x 1 1/8 in. R8RS12mm Precision Wheelchair or Scooter Bearing

Item #: B165  
The 12 mm x 1 1/8 in. R8RS12mm Precision Wheelchair or Scooter Bearing features a maintenance free design and is used to adapt aftermarket manual wheelchair wheels to wheelchairs with 12 mm axles.
 
Regular Price$6.99
Price:
$5.99
You Save:$1.00 (14%)
Qty: 
 

12 mm x 1 1/8 in. R8RS12mm Precision Wheelchair or Scooter Bearing

  • Maintenance free design requiring no oil or grease
  • Replacement for bearing reference numbers R8RS12mm
  • Inside diameter (bore) 12 mm
  • Outside diameter 1 1/8" (1.1250)
  • Width (thickness) 5/16" (.3125)
  • Sold individually (each)
12 mm x 1 1/8 in. R8RS12mm Precision Wheelchair or Scooter Bearing Fitment Notes
This bearing is used most often on aftermarket manual wheelchair wheels when the wheelchair is equiped with 12 mm axles. Your existing bearing should have one of these alpha numeric numbers stamped on the shield of the bearing: R8RS12mm, R8RS 12mm, R8 or R8RS. It is highly advisable to measure the inside diameter of your existing bearing if the reference number is R8 or R8RS and make sure it is 12 mm as R8 or R8RS are also available with 1/2" or 7/16" inner diameters.

General Wheelchair and Scooter Bearing Notes
Many bearings found on wheelchairs and scooters have a alpha numeric reference or just a numeric reference number stamped on the side of the bearing which refers to the type and size of the bearing. In most cases, that is all you need to purchase the correct bearing. For alpha numeric reference numbers ending in Z, ZZ, RS, or 2RS, they are all interchangeable (Z and ZZ refer to a metal outer side shield and RS and 2RS refer to a rubber outer side shield protecting the balls inside the bearing). If your bearing has no reference on it, you will have to measure. If the bearing reference appears worn off, you may be able to see it stamped on the other side.
12 mm x 1 1/8 in. R8RS12mm Precision Wheelchair or Scooter Bearing
B165, EYLB165
 Average Rating:  0 Star Rating
0.0
 
Write a Review

Related Products