12 mm x 37 mm 6301RS Precision Wheelchair or Scooter Bearing
Maintenance free design and pre-greased
High quality double shielded design keeps grease in and contaminants out
Replacement for bearing reference numbers 6301RS
Inside diameter (bore) 12 mm (.4724 in.)
Outside diameter 37 mm (1.4567 in.)
Width (thickness) 12 mm (.4724 in.)
Sold individually (each)
12 mm x 37 mm 6301RS Precision Wheelchair or Scooter Bearing Fitment Notes
This bearing is used on many manual wheelchairs from Drive Medical but not all of them. Verify the reference number is 6301RS, 63012RS, 6301Z or 6301ZZ. Even if a reference number is found, you should still measure, as their is a 15mm inner diameter bearing with the same reference number and same outer dimension.
This 12 mm x 37 mm 6301RS Precision Wheelchair or Scooter Bearing can be used as a replacement for the following manufacturer part numbers:
GEY-AXLEB Breezy Easy Care or Guardian Easy Care 2000, 3000, and 4000 models
Medline WCA806955K
Medline WCA806955PR
Drive STDS5D1012
General Wheelchair and Scooter Bearing Notes
Many bearings found on wheelchairs and scooters have a alpha numeric reference or just a numeric reference number stamped on the side of the bearing which refers to the type and size of the bearing. In most cases, that is all you need to purchase the correct bearing. For alpha numeric reference numbers ending in Z, ZZ, RS, or 2RS, they are all interchangeable (Z and ZZ refer to a metal outer side shield and RS and 2RS refer to a rubber outer side shield protecting the balls inside the bearing). If your bearing has no reference on it, you will have to measure. If the bearing reference appears worn off, you may be able to see it stamped on the other side.
12 mm x 37 mm 6301RS Precision Wheelchair or Scooter Bearing
WARNING: Many of the products carried by EnableYourLife.com can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
