17 mm x 40 mm 6203RS Precision Wheelchair or Scooter Bearing With Ring
Item #:
B125
The 17 mm x 40 mm 6203RS Precision Wheelchair or Scooter Bearing With Ring features a snap ring around the outer diameter and is used on some Pride Wheelchairs.
17 mm x 40 mm 6203RS Precision Wheelchair or Scooter Bearing With Ring
Maintenance free design requiring no oil or grease
Replacement for bearing reference numbers 6203RS
Inside diameter (bore) 17 mm (.6693 in.)
Outside diameter 40 mm (1.5748 in.) - not including snap ring
Width (thickness) 12 mm (.4724 in.)
Sold individually (each)
17 mm x 40 mm 6203RS Precision Wheelchair or Scooter Bearing With Ring Fitment Notes
This bearing is known to be used on some Pride products. It is important to verify your existing bearing has a snap ring around the outside diameter. Verify the reference number is 6203RS. Measuring the inner diameter (bore) is recommended on this bearing as there are 6 or 7 bearings starting with reference number 6203 that all share the outer diameter and width (thickness).
General Wheelchair and Scooter Bearing Notes
Many bearings found on wheelchairs and scooters have a alpha numeric reference or just a numeric reference number stamped on the side of the bearing which refers to the type and size of the bearing. In most cases, that is all you need to purchase the correct bearing. For alpha numeric reference numbers ending in Z, ZZ, RS, or 2RS, they are all interchangeable (Z and ZZ refer to a metal outer side shield and RS and 2RS refer to a rubber outer side shield protecting the balls inside the bearing). If your bearing has no reference on it, you will have to measure. If the bearing reference appears worn off, you may be able to see it stamped on the other side.
17 mm x 40 mm 6203RS Precision Wheelchair or Scooter Bearing With Ring
