4.00-5 Primo / CST Diamond Foam Filled Wheelchair/Scooter Tire
Item #:
F078
The 4.00-5 Primo - CST Diamond Foam Filled Wheelchair and Scooter Tire features closely spaced diamond tread pattern provides good traction in slippery conditions while giving you a smooth ride on a variety of surfaces. The foam fill gives the user peace of mind he/she will never get a flat or have to fill the tire with air. Sold individually (each). For a pair, please order a quantity of 2.
4.00-5 Primo - CST Diamond Foam Filled Wheelchair and Scooter Tire
C154 tread pattern (diamond pattern design)
Bead width is 2.60” (Use the guide below for help finding your proper bead width)
Two piece wheels (split rims) are required
Gray in color
Latex free
SSold individually (each). For a pair, please order a quantity of 2.
Special note:
This tire may be branded either "Primo" or "Cheng Shin Tire" (CST). They are the same tire from the same manufacturer.
Fitment notes:
Known to fit many wheelchairs and scooters needing the 4.00-5 size including some Shopriders, Invacare Panther MX4 Scooter, Pride Legend XL Scooter - Front, Pride Celebrity XL Scooter - Front, Pride Hurricane PMV Scooter - Front, Pride Hurricane PMV 2001 Scooter - Front. It is always advisable to double check the bead width for confirmation
A Few Words About Foam Filled Wheelchair and Scooter Tire Bead Width
Foam filled wheelchair tires and foam filled scooter tires provide added peace of mind knowing you won't ever get a flat tire and you won't ever have to fill the tire with air. This added peace of mind requires your wheelchair or scooter to have a two piece wheel (also called a split rim) to be able to install them. Since a foam filled tire is basically a pneumatic tire filled with foam during the manufacturing process, tire sizing is the same. However the bead width of the split rim can vary. This is because there was never standard (split rim) bead width sizing adopted in the wheelchair/scooter industry. As a result you can have several tires of the same size with different bead widths and only one of them will properly fit your split rim. If the bead width of the tire you purchase is too narrow for your split rim, there will not be enough compression between the two halves of your split rim against the tire causing the tire to rotate separately. If the bead width is too wide, you will never get the two halves of the split rim and the tire screwed back together. Taking the time to measure bead width will ensure you purchase the right foam filled tire and save you from an installation headache and the hassle of sending them back.
WARNING: Many of the products carried by EnableYourLife.com can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.