4.10 x 3.50-6 Primo Ability Foam Filled Wheelchair and Scooter Tire

• C168 tread pattern (knobby design)
• 4 ply construction for maximum durability
  
• Available bead widths are 3.25" and 3.50" - choose when ordering (Use the guide below for help finding your proper bead width)
• The F082 (3.25" bead width model) has an unbroken center rib in the center of the tread and the F182 (3.50" bead width model) has slightly different tread in the center - see images above
  
• Two piece wheels (split rims) are required
• Gray in color
• Latex free
  
• Sold individually (each). For a pair, please order a quantity of 2.

Fitment Notes:
The 3 1/2" (3.50") bead width model is known to fit the Pride Celebrity XL Scooter - Rear, Pride Legend XL Scooter - Rear, Pride Legend XL 03 Scooter - Front and Rear, Pride Victory XL Scooter - Front and Rear, Pride Hurricane PMV Scooter - Rear, Pride Hurricane PMV 01 Scooter - Rear, Jazzy 1143, Jazzy 1143 Ultra, and the Bruno Cub

The 3 1/4" (3.25") bead width model is known to fit the Pride Victory XL-4 Scooter - front and rear.

These two bead widths may fit other power wheelchairs and scooters needing this size and bead width. Measuring your bead width is always recommend for confirmation and If your brand and model is listed, make sure it has the 4.10 x 3.50-6 size option before ordering

Special Note:
The 3.25" (F082)bead width model is branded either "Primo Ability" or "Cheng Shin" and the 3.50" (F182) bead width model is branded "Primo Power" or "Cheng Shin". Regardless of the name, they are same tires from the same manufacturer.

Foam filled wheelchair tires and foam filled scooter tires provide added peace of mind knowing you won't ever get a flat tire and you won't ever have to fill the tire with air. This added peace of mind requires your wheelchair or scooter to have a two piece wheel (also called a split rim) to be able to install them. Since a foam filled tire is basically a pneumatic tire filled with foam during the manufacturing process, tire sizing is the same. However the bead width of the split rim can vary. This is because there was never standard (split rim) bead width sizing adopted in the wheelchair/scooter industry. As a result you can have several tires of the same size with different bead widths and only one of them will properly fit your split rim. If the bead width of the tire you purchase is too narrow for your split rim, there will not be enough compression between the two halves of your split rim against the tire causing the tire to rotate separately. If the bead width is too wide, you will never get the two halves of the split rim and the tire screwed back together. Taking the time to measure bead width will ensure you purchase the right foam filled tire and save you from an installation headache and the hassle of sending them back.

If you have questions about which wheelchair or scooter tire to purchase, how to determine the correct size, or an installation question, visit our buying guide for wheelchair and scooter tires.