4 x 1 in. (100 mm) Volcanic Grande Ultimate™ Light-Up Wheelchair Caster
Now with 8 lights!
Item #:
14100
The 4 x 1 in. (100 mm) Volcanic Grande™ Ultimate Light-Up Wheelchair Caster features 8 LED lights (4 per side), a self generating electrical system, and a solid (clear) urethane tire for flat free performance. Sold individually (each). For a pair, please order a quantity of 2.
4 x 1 in. (100 mm) Volcanic Grande Ultimate™ Light-Up Wheelchair Caster
Features 4 bright LED lights per side in green, red, blue, and white (8 lights per wheel)
Lights can be seen at 360 degree angles
Solid flat free tire made from clear urethane
Water resistant design helps keep lighting elements dry*
Lights are powered by a self generating system - no batteries required
1" hub width (use the guide below for help measuring your existing caster wheel)
5/16" inner diameter high performance bearings included (608Z)
Latex free
Sold individually (each). For a pair, please order a quantity of 2.
*Water resistant does not mean water proof - Care should be taken when used in a wet environment.
How Does it Work?
As the wheelchair caster rolls forward or backward, a self generating power system (magnet ring) supplies a small electric charge to power each LED light. The faster the wheelchair caster rolls, the more the LED's light up. Even though there are only 4 small LED lights per side, once rolling they give the impression the entire wheel is covered in lights! In fact the LED light is bright enough to be seen up to 300 meters away making these caster wheels an excellent safety device while using your wheelchair at night.
Fitment Notes
This lighted wheelchair caster assembly will replace 4 x 1 inch caster wheels found on Quickie, Top End (Invacare), Colours, and many other wheelchair brands. Some TiLite wheelchairs use 3/8" ID bearings and these caster wheels will not work. Regardless of wheelchair brand, it is always advisable to confirm your size using the guide below.
Volcanic Grande Ultimate™ Light-Up Wheelchair Caster Video
Installation Notes
Installing these caster wheels on your wheelchair is the same as any other except that you need to create a little friction by tightening your axle to a point to make the lights work. If your axle is too tight, you will hear a clicking sound. If no lights are seen, your axle is not tight enough.
Measuring your existing wheelchair caster:
Purchasing the proper wheelchair caster is as simple as measuring the old one. Even if the size is written on the existing caster, you still want to make sure the hub width and bearing size will be correct. Properly measuring will ensure you order the correct caster and prevent an installation headache and the hassle of sending them back.
If you have questions about which wheelchair caster to purchase, how to determine the correct size, or an installation question, visit our Buying Guide for Wheelchair Caster Wheels.
4 x 1 in. (100 mm) Volcanic Grande Ultimate™ Light-Up Wheelchair Caster
WARNING: Many of the products carried by EnableYourLife.com can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
