Bearing race extends inward approx. 7/8 and outward approx 1/16"
Sold individually (each)
5/16 x .906 in. Ext. Race Precision Wheelchair or Scooter Bearing Fitment Notes
This bearing has an extended race both inward and outward. Look at the image above closely. This bearing is very uncommon and as such it is highly advisable to remove your old bearing and verify yours has the extended race on both sides.
General Wheelchair and Scooter Bearing Notes
Many bearings found on wheelchairs and scooters have a alpha numeric reference or just a numeric reference number stamped on the side of the bearing which refers to the type and size of the bearing. In most cases, that is all you need to purchase the correct bearing. For alpha numeric reference numbers ending in Z, ZZ, RS, or 2RS, they are all interchangeable (Z and ZZ refer to a metal outer side shield and RS and 2RS refer to a rubber outer side shield protecting the balls inside the bearing). If your bearing has no reference on it, you will have to measure. If the bearing reference appears worn off, you may be able to see it stamped on the other side.
5/16 x .906 in. Ext. Race Precision Wheelchair or Scooter Bearing
WARNING: Many of the products carried by EnableYourLife.com can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.