Featuring a nylock nut that won't come off or loosen
Used mainly on the rear wheel of a heavy duty wheelchair
2 lengths to choose from
Sold individually (each)
5/8" Fine Thread Wheelchair Axle with Nut Fitment Notes
These axles are used on a variety of heavy duty manual bariatric wheelchairs to secure the rear wheel to the wheelchair. To get the proper length, measure from the underside of the axle head (on your existing axle) to the end. If the existing axle is not available, you will need to add the the hub width of the wheel, the carrier tube on the wheelchair, plus any spacer that may be used and add approximately 1/2" of an inch (to allow for the nut). Also make sure the inner diameter of your wheel bearing is 5/8".
WARNING: Many of the products carried by EnableYourLife.com can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.