5/8 x 1 3/8 in. 499502HNR Precision Wheelchair or Scooter Bearing with Snap Ring
Item #:
B61
The 5/8 x 1 3/8 in. 499502HNR Precision Wheelchair or Scooter Bearing with Snap Ring is used on several heavy duty caster assemblies from Invacare, Pride, Amigo, and features a maintenance free design.
5/8 x 1 3/8 in. 499502HNR Precision Wheelchair or Scooter Bearing with Snap Ring
Maintenance free design and pre-greased
High quality double shielded design keeps grease in and contaminants out
Replacement for bearing reference number 499502HNR and 99502HNR
Inside diameter (bore) 5/8" (.625)
Outside diameter 1 3/8" (1.375)
Outside diameter including snap ring 1 9/16" (1.5625)
Width (thickness) 7/16" (.4375)
Sold individually (each)
5/8 x 1 3/8 in. 499502HNR Precision Wheelchair or Scooter Bearing with Snap Ring Fitment Notes
Used on several heavy duty caster assemblies from Invacare, Pride (Jazzy, Quantum), and Amigo. The snap ring acts as a flange to seat the bearing. Your existing bearing should have the alpha numeric numbers stamped on the shield of the bearing: 99502HNR or 499502HNR. This bearing is also used on non-wheelchair related equipment.
This 5/8 x 1 3/8 in. 499502HNR Precision Wheelchair or Scooter Bearing with Snap Ring can be used as a replacement for the following manufacturer part numbers:
Pride Mobility BRGBTRA1007
Invacare 1015610
General Wheelchair and Scooter Bearing Notes
Many bearings found on wheelchairs and scooters have a alpha numeric reference or just a numeric reference number stamped on the side of the bearing which refers to the type and size of the bearing. In most cases, that is all you need to purchase the correct bearing. For alpha numeric reference numbers ending in Z, ZZ, RS, or 2RS, they are all interchangeable (Z and ZZ refer to a metal outer side shield and RS and 2RS refer to a rubber outer side shield protecting the balls inside the bearing). If your bearing has no reference on it, you will have to measure. If the bearing reference appears worn off, you may be able to see it stamped on the other side.
5/8 x 1 3/8 in. 499502HNR Precision Wheelchair or Scooter Bearing with Snap Ring
WARNING: Many of the products carried by EnableYourLife.com can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
