(800) 983-3602
Monday - Friday 9am - 4pm Pacific
support@enableyourlife.com
Categories
Clearance Center!
Aids for Daily Living
Bathroom Safety
Medication Aids
Respiratory Therapy
Self Help Aids
Walking Aids
Wheelchairs & Scooters
Wheelchair and Scooter Parts
 
 
7 in. Aluminum Wheelchair Caster Fork With 2 1/2L x 1/2 in. Stem & Nut
View Larger
0 Star Rating
0.0
 (Be the first to Write a Review)
 
 

7 in. Aluminum Wheelchair Caster Fork With 2 1/2L x 1/2 in. Stem & Nut - pr

Item #: CF040  
The 7 in. Aluminum Wheelchair Caster Fork With 2 1/2L x 1/2 in. Stem & Nut features 3 axle holes allowing you to adjust the ride height.
 
Regular Price$43.99
Price:
$36.99
You Save:$7.00 (16%)
Qty: 
 

7 in. Aluminum Wheelchair Caster Fork With 2 1/2L x 1/2 in. Stem & Nut - pr

  • 1/2" x 2 1/2" stem bolt with nut is removable so you can use your existing stem bolt or purchase a longer one
  • 2" width between the forks
  • Three (3) 5/16" axle size holes allowing you to adjust the ride height or use different size casters up to 8" in diameter
  • Sold by the pair
7 in. Aluminum Wheelchair Caster Fork With 2 1/2L x 1/2 in. Stem & Nut Dimension Guide

 
A few words about wheelchair caster forks and wheelchair caster stem bolts
Wheelchair caster wheels are mounted to a caster fork assembly. A caster fork assembly consists of the fork itself, the caster stem bolt (the long bolt coming up from the top of the fork), caster stem bearings, and sometimes a spacer or spacers. The caster fork assembly attaches to the wheelchair by inserting the caster stem bolt into the caster stem housing though the bearings and spacer (if you have spacers). The stem bolt is secured with a nut at the top of the housing. Having a bent stem bolt or caster fork can cause all kinds of problems and make the wheelchair much harder to maneuver, not to mention pose a safety risk for the user. If the caster stem bolt isn't at 90 degrees to the ground, it’s time to replace it. Also carefully check the fork itself for damage. When replacing a stem bolt, its best to install new caster stem bearings.

If the caster fork is bent, you'll need to replace the whole assembly. Our caster forks come with the caster stem bolts already attached to make it easier. Just add a new set of bearings and you're good to go. Be sure to keep your spacer(s) if you have them for later re installation.
 
7 in. Aluminum Wheelchair Caster Fork With 2 1/2L x 1/2 in. Stem & Nut - pr
CF040
 Average Rating:  0 Star Rating
0.0
 
Write a Review

Related Products

 
WARNING: Many of the products carried by EnableYourLife.com can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.