8 x 2 in. Pride Wheelchair Replacement Caster with 5/16 in. Bearings
Item #:
WHLASMB1112
This 8 x 2 in. Pride Caster Assembly caster wheel is found on many Pride Mobility wheelchairs including Jazzy and Quantum models. The multi-ribbed tread provides a smooth ride and the solid urethane construction provides flat-free piece of mind. Sold individually (each). For a pair, order quantity 2.
8 x 2 in. (200 x 50) Pride Wheelchair Replacement Caster Wheel with 5/16 in. Bearings
One piece design with flat free solid molded on tire will never go flat and no air is needed*
Multi-ribbed tread pattern for a smooth ride
Hub width: 2 1/2" (hub width includes the extended race of the bearing)
Included bearings are 5/16" (8 mm) inner diameter (608-ZZ)
Latex free
Sold individually (each). For a pair, order quantity 2
Fitment notes:
This caster assembly from Pride is fairly universal and will fit any wheelchair that requires a 200 x 50 (8 x 2 inch) size with a 2 1/2 hub and 5/16" (8 mm) bearing (reference 608RS, 6082RS, 608Z, and 608ZZ). You can also find this size on some heavy duty rollators. Of course it fits the following wheelchairs from Pride as well:
Dynamo 1114 ATS (rear gen 4)
Quantum 1103 Ultra
Quantum 1121 (Gen 2)
Quantum 1122 (Gen 5)
Jazzy 1101 (rear - double sided caster fork)
Jazzy 1121 / 1121HD (Std Base with straight beam or curved caster beam) - with double sided caster fork
Jazzy 1100 (Gen 4 - rear)
Jazzy 1103 - rear
Jazzy 1103 Ultra - Rear
Jazzy 1104 Rear
Jazzy 1105 Rear
Jazzy 1113 Caster to Oct 8, 2001
Jazzy 1113 ATS Caster
Jazzy 1115 Gen 2 Caster
Jazzy 1120 Rear Gen 4
Jazzy 1122 with double sided fork
Jazzy 1133 Caster
Jazzy 1143 Ultra
Jazzy Select 14 on or after 8733707001s10 (rear)
Jazzy Select 14 XL SN J8809407001s10 and later
Jazzy Select 7 rear
Jet 10 caster rear
Jet 10 ultra caster prior to SN J5805104001s10
Jet 10-1 rear caster
Jet 12 rear caster
Jet 3 Ultra prior to SN J4605104001s10
Jet 3-1 caster
Jet 2
Jet 7 - Pride no longer has the replacement caster wheel for the Jet 7 (Pride Part WHLASMB1437), this caster will work as the replacement
If your Pride wheelchair caster is mounted to a single sided caster fork, it may be this caster assembly instead. In addition, this wheelchair caster may fit other wheelchairs from Pride or other brands such as Quickie or Everest and Jennings. It is always advisable to double check your dimensions even if your wheelchair is listed above. If your Pride wheelchair has an 8 x 2 inch caster assembly with 3/8 inch inner diameter bearings, we carry it here: 8 x 2 in. (200 x 50) Pride Wheelchair Replacement Caster Wheel with Solid Tire and 3/8" Bearings
Measuring your existing wheelchair caster:
Purchasing the proper wheelchair caster is as simple as measuring the old one. Even if the size is written on the existing caster, you still want to make sure the hub width and bearing size will be correct. Properly measuring will ensure you order the correct caster and prevent an installation headache and the hassle of sending them back.
If you have questions about which wheelchair caster to purchase, how to determine the correct size, or an installation question, visit our Buying Guide for Wheelchair Caster Wheels.
* Tire is not removable or replaceable
8 x 2 in. (200 x 50) Pride Wheelchair Replacement Caster Wheel with 5/16 in. Bearings
8 x 2 in. Pride Caster Assembly
WARNING: Many of the products carried by EnableYourLife.com can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.