Basic Invacare Style Wheelchair Wheel Lock with Push to Lock Handle
Item #:
WL060
This Invacare style wheelchair wheel lock features a simple bolt through design that fits a variety of Invacare Wheelchairs with 7/8" tubing including the popular Invacare Tracer Wheelchair
Basic Invacare Style Wheelchair Wheel Lock with Push to Lock Handle
Simple bolt through design fits a variety of Invacare Wheelchairs with 7/8" tubing
Features a push to lock handle with rubber-like tip for extra grip
Includes the bolt, lock nut, and concave washer
Attractive chrome finish
Available for fixed or detachable armrest model Invacare Wheelchairs
Sold as each
Purchase notes:
To determine the correct side when ordering, note either the left or right side while seated in the wheelchair. The bolt through design works on 7/8" diameter tubing found on many wheelchairs from Invacare including the 1000, 1000E, 4000, World Chair, 9000 and 9000XT/XDT/SL, and Tracer LX, Plus, EX, MG, and Transport. It may fit other wheelchairs from Invacare or other brands needing a bolt through design wheel lock for 7/8" tubing. Look at the images closely for verification prior to ordering even if your model is listed above.
It is important to note if your wheelchair has detachable armrest side panels since the wheel locks for those models use an offset handle.
Basic Invacare Style Wheelchair Wheel Lock with Push to Lock Handle
WARNING: Many of the products carried by EnableYourLife.com can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.