Wheelchair Vinyl Seat with 4 in. Center Bolt Pattern for E & J and Compatible

• Features approx 1/4 in. foam padding for comfort
• Made from durable embossed vinyl (22" and 24" model in dark blue are non-embossed)
• 16 in. deep with 5 widths to choose from
• Available in black, dark blue, or navy blue (scroll down to see color guide)
  
• Hardware included
• Please review the dimension guide below prior to purchase!
• Sold individually (each)

Fitment notes:
The Wheelchair Vinyl Seat with 4 in. Bolt Pattern for E & J and Compatible fits many manual wheelchairs from Everest and Jennings (E & J), Tuffcare, S & D, Theradyne C, D and E Series. Available sizes for this wheelchair seat are 16" wide x 16" deep, 18" wide x 16" deep, 20" wide x 16" deep, 22" wide x 16" deep, and 18" wide x 16" deep. Use the dimension guide below to confirm size prior to ordering.

We also have the Matching Wheelchair Seat Back
If you are looking for or need the Everest and Jennings style vinyl seat back, it can be found here: Wheelchair Vinyl Seat Back for Everest & Jennings and Compatible

Choosing the right wheelchair upholstery size
All you need is the width, depth or height, and the hole spacing. Measure the width of your wheelchair seat with the wheelchair completely unfolded. For the wheelchair seat, note the depth and for the wheelchair seat back, note the height. Next measure the distance between the holes that secure the seat or back (measuring from hole center to hole center). See image below.

Wheelchair Vinyl Seat with 4 in. Center Bolt Pattern for E & J and Compatible Dimension Guide

Wheelchair Vinyl Seat with 4 in. Center Bolt Pattern for E & J and Compatible Color Guide

Available colors for this vinyl wheelchair seat are black, navy, and dark blue. Since not all devices (computer monitors, tablets, phones, etc) display colors in the same way, the actual color you receive may vary.

Wheelchair Vinyl Seat with 4 in. Bolt Pattern for E & J and Compatible Installation Tips
Fold up the wheelchair seat slightly to reduce the tension on the upholstery. Unscrew the existing nylon seat and pull off. Re-install new nylon wheelchair seat with provided screws and grommets. It is normal for the upholstery to feel a little firmer once the wheelchair is unfolded as it is new unworn vinyl.