The Invacare 8 Amp Offboard Wheelchair / Scooter Battery Charger is fully automatic and will work with all wheelchairs and scooters using an XLR connector.
Featuring a microcomputer controlled design with fully automatic operation - just plug it in
8 amp output provides fast efficent charging
Multi LED lights show charging status
Charger can be be free standing or wall mounted
Standard XLR pin connector fits a variety of wheelchairs and scooters from all the major brands
Works with all gel cell batteries 28 to 60 Ah
Sold individually (each)
Fitment Notes:
The XLR pin connector is standard on many electric wheelchairs and scooters from Invacare, Quickie, Pride, Merits, Pacesaver, plus many more. You can see a picture of the XLR connector above to verify that your wheelchair or scooter has this. Your wheelchair or scooter must use a 24V system (two batteries) and the batteries must gel cell lead acid 28 to 60 Amp Hour. Works with all battery sizes. Use only with a 120V (110V) AC main supply.
This battery charger will work with the following Invacare wheelchairs:
Arrow® FWD
FDX® (Formula™ CGE option included)
Nutron®
P7E™
Power Tiger™
Pronto® M50™ Pronto® M51™ with SureStep® (Before 1/20/05)
Pronto® M50™/ M51™ with SureStep® (After 1/19/05) Pronto® M61™ with SureStep®
Pronto® M71™ with SureStep®
Pronto® M71™ jr. with SureStep™
Pronto® M91™ with SureStep®
Pronto® M94™ with SureStep®
Pronto® R2™, Ranger II™ MWD for WSBT (After 2/29/2000)
Storm Series®
Storm Series® 2G
Storm Series® 3G (Elevating Seat included ESS6-STM)
Storm Series® Power 9000 (After 11/14/1995)
Storm Series® Ranger II™
Storm Series® Ranger II™ Excel™ R2™ jr.
Storm Series® Ranger II™ MWD (Before 3/1/2000)
TDX® SC (CGE option included) and TDX® SPREE (CGE standard)
TDX® SI, TDX® SI-2 TDX® SI-HD
TDX®3 TDX®3 SE TDX®4 TDX®5
TDX®SP/SP-GT/SR
Xterra™ GT™
It is important that your Invacare wheelchair or scooter (or those from other brands) has the round 3 pin (XLR connector). Some of the models listed above had the option for an on-board charger. If this is the case, you may still have the XLR connector located on the controller.
24 volt charger / Power chair, December 6, 2018 By Marlene (Vancouver Bc)
Had the same charger for 5 yrs and never had any issue as long as you make sure that you7 dont over charge.I suggest waiting until meter is showing Half remaining before topping up.
WARNING: Many of the products carried by EnableYourLife.com can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.