Wheelchair Seat and Back Upholstery Screws, Washers, and Nuts - 8 pk
Phillips head screws, recessed washers, and lock nuts
Works with most wheelchair upholstery using screws and nuts
Screws measure 1 1/4" (total length)
Sold in an 8 pack (8 screws, 8 washers, and 8 lock nuts)
Fitment Notes:
Most wheelchair seats and backs take 8 screws (4 on each side). If you have 5 holes on each side, you will need to order a second pack. Works with a variety of wheelchairs and upholstery from Invacare, Everest and Jennings, Quickie, Tuffcare, Drive, etc. using screws with nuts. Look at the underside of the seat frame to confirm your wheelchair is using nuts (Most wheelchairs use sheet metal screws without nuts) prior to ordering.
Wheelchair Seat and Back Upholstery Screws, Washers, and Nuts - 8 pk
VH010
WARNING: Many of the products carried by EnableYourLife.com can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.