Wheelchair Vinyl Seat with 3 5/8 in. Center Bolt Pattern for Invacare and Compatible

• Features approx. 1/4 in. foam padding for comfort
• Made from durable embossed vinyl
• 16 in. deep with 3 widths to choose from
• Available in black or Invacare blue (scroll down to see color guide)
  
• Hardware included
• Please review the dimension guide below prior to purchase!
• Sold individually (each)

Fitment notes:
The Vinyl Wheelchair Seat for Invacare and Compatible fits many manual wheelchairs from Invacare (including the Invacare Tracer), Medline, Drive, Theradyne, JAC, Sunmark, and Evermed. Available sizes for this wheelchair seat are 16" wide x 16" deep, 18" wide x 16" deep, and 20" wide x 16" deep. Use the dimension guide below to confirm size prior to ordering.

Choosing the right wheelchair upholstery size
All you need is the width, depth or height, and the hole spacing. Measure the width of your wheelchair seat with the wheelchair completely unfolded. For the wheelchair seat, note the depth and for the wheelchair seat back, note the height. Next measure the distance between the holes that secure the seat or back (measuring from hole center to hole center). See image below.

Wheelchair Vinyl Seat with 3 5/8 in. Center Bolt Pattern for Invacare and Compatible Installation Tips
Fold up the wheelchair seat slightly to reduce the tension on the upholstery. Unscrew the existing vinyl seat and pull off. Re-install new vinyl wheelchair seat with provided screws and grommets. It is normal for the upholstery to feel a little firmer once the wheelchair is unfolded as it is new unworn vinyl.