Wheelchair Vinyl Seat Back with 5 1/2 in. Center Bolt Pattern for E & J and Compatible
- Features approx 1/4 in. foam padding for comfort
- Made from durable embossed vinyl (22" model in dark blue is non-embossed)
- 18 in. high with 5 widths to choose from
- Available in black, navy, and dark blue (scroll down to see color guide)
- Hardware included
- Please review the dimension guide below prior to purchase!
- Sold individually (each)
Fitment notes:
The Wheelchair Vinyl Seat Back with 5 1/2 in. Bolt Pattern for E & J and Compatible fits many manual wheelchairs from Everest and Jennings (E & J), Tuffcare, S & D, Theradyne C, D and E Series. Available sizes for this wheelchair seat are 16" wide x 18" high, 18" wide x 18" high, 20" wide x 18" high, 22" wide x 18" high and 24" wide x 18" high. Use the dimension guide below to confirm size prior to ordering.
We also have the Matching Wheelchair Seat
If you are looking for or need the Everest and Jennings style vinyl seat, it can be found here: Wheelchair Vinyl Seat for Everest & Jennings and Compatible
Choosing the right wheelchair upholstery size
All you need is the width, depth or height, and the hole spacing. Measure the width of your wheelchair seat with the wheelchair completely unfolded. For the wheelchair seat, note the depth and for the wheelchair seat back, note the height. Next measure the distance between the holes that secure the seat or back (measuring from hole center to hole center). See image below.
Wheelchair Vinyl Seat Back with 5 1/2 in. Center Bolt Pattern for E & J and Compatible Dimension Guide
Wheelchair Vinyl Seat Back with 5 1/2 in. Center Bolt Pattern for E & J and Compatible Color Guide
Available colors for this vinyl wheelchair seat back are black, navy, and dark blue. Since not all devices (computer monitors, tablets, phones, etc) display colors in the same way, the actual color you receive may vary.
Wheelchair Vinyl Seat Back with 5 1/2 in. Bolt Pattern for E & J and Compatible Installation Tips
Fold up the wheelchair seat slightly to reduce the tension on the upholstery. Unscrew the existing vinyl seat back and pull off. Re-install new vinyl wheelchair seat back with provided screws and grommets. It is normal for the upholstery to feel a little firmer once the wheelchair is unfolded as it is new unworn vinyl.
Wheelchair Vinyl Seat Back with 5 1/2 in. Center Bolt Pattern for E & J and Compatible
UB13-1, UB15-1, UB17-1, UB16-1, UB18-1, UB13-3, UB15-3, UB17-3, UB16-3, UB18-3, UB13-44, UB15-44, UB17-44, UB16-44, UB18-44
|