Wheelchair Vinyl Seat Back for Invacare and Compatible
Item #:
UB43
The Wheelchair Vinyl Seat Back with 5 in. Center Bolt Pattern for Invacare and Compatible features 1/4' of foam padding for comfort, installs in minutes, and fits many manual wheelchairs from Invacare (including the Invacare Tracer), plus Medline, Drive, Theradyne, JAC, Sunmark, and Evermed.
Wheelchair Vinyl Seat Back with 5 in. Center Bolt Pattern for Invacare and Compatible
Features approx. 1/4 in. foam padding for comfort
Made from durable embossed vinyl
18 in. high with 5 widths to choose from
Available in black or Invacare blue (scroll down to see color guide)
Hardware included
Please review the dimension guide below prior to purchase!
Sold individually (each)
Fitment notes:
The Vinyl Wheelchair Seat Back for Invacare and Compatible fits many manual wheelchairs from Invacare (including the Invacare Tracer, Invacare 4000 - after 1989), Medline, Drive, Theradyne, JAC, Sunmark, and Evermed. Available sizes for this wheelchair seat back are 16" wide x 18" high, 18" wide x 18" high, and 20" wide x 18" high, 22" wide x 18" high and 24" wide x 18" high. Use the dimension guide below to confirm size prior to ordering.
Choosing the right wheelchair upholstery size
All you need is the width, depth or height, and the hole spacing. Measure the width of your wheelchair seat with the wheelchair completely unfolded. For the wheelchair seat, note the depth and for the wheelchair seat back, note the height. Next measure the distance between the holes that secure the seat or back (measuring from hole center to hole center). See image below.
Wheelchair Vinyl Seat Back with 5 in. Center Bolt Pattern for Invacare and Compatible Dimension Guide
Wheelchair Vinyl Seat Back with 5 in. Center Bolt Pattern for Invacare and Compatible Color Guide
Available colors for this vinyl wheelchair seat back are black and Invacare blue. Since not all devices (computer monitors, tablets, phones, etc) display colors in the same way, the actual color you receive may vary.
Wheelchair Vinyl Seat Back with 5 in. Center Bolt Pattern for Invacare and Compatible Installation Tips
Fold up the wheelchair seat slightly to reduce the tension on the upholstery. Unscrew the existing vinyl seat back and pull off. Re-install new vinyl wheelchair seat back with provided screws and grommets. It is normal for the upholstery to feel a little firmer once the wheelchair is unfolded as it is new unworn vinyl.
Wheelchair Vinyl Seat Back with 5 in. Center Bolt Pattern for Invacare and Compatible
Invacare Back Upholstery, 16 Inch Wide x 18 Inch High, Embossed
Invacare Back Upholstery, 18 Inch Wide x 18 Inch High, Embossed
Invacare Back Upholstery, 20 Inch Wide x 18 Inch High, Embossed
Invacare Back Upholstery, 22 Inch Wide x 18 Inch High, Embossed
Invacare Back Upholstery, 24 Inch Wide x 18 Inch High, Embossed
UB43-1, UB45-1, UB47-1, UB46-1, UB48-1, UB43-8, UB45-8, UB47-8, UB46-8, UB48-8, UB431, UB451, UB471, UB461, UB481, UB438, UB458, UB478, UB468, UB488
WARNING: Many of the products carried by EnableYourLife.com can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.